260540 Zinsser White Swimming Pool Paint 5g

• Renew and protect your masonry swimming pool. Zinsser Swimming Pool Paint is the perfect solution for decorating and waterproofing interior or exterior concrete, gunite, masonry or plastered swimming pools, as well as other concrete and masonry surfaces, above and belowground.
• Not intended for use over chlorinated rubber, fiberglass, or two-part Epoxy-coated surfaces.
• Nationally compliant formula, Can be used on above or below ground concrete pools as well as plastered or other masonry surfaces. No primer or topcoat is necessary
• Coverage: 75-100 sq.ft./gal. (rough surfaces), 125-150 sq.ft./gal. (smooth surfaces)
• Dry and recoat times are based on 70°F and 50% relative humidity. Dries to touch in 4 to 6 hours. Apply a second coat after 24 hours to ensure sufficient time to dry. Allow the coating to cure for 72 hours under good conditions before filling the pool.
• Apply only when air and surface temperatures are between 40- 90°F (5-32°C) and the surface temperature is at least 5°F (3°C) above the dew point.
• Use paint thinner, mineral spirits or turpentine for general cleanup.
• White
• Weight: 56.00 lb.
• UPC: 020066208882
• Manufacturer Part No: 260540