• Buy OSSMD-GDT  Dual-Relay, PIR/Ultrasonic Wall Switch Occupancy Sensor 2 Pack, Light Almond at lowest price.
Occupancy Sensor

  • The OSSMD provides automatic lighting control for two separate loads from a single unit. It is compatible with incandescent, fluorescent, low-voltage lighting, and fan loads. The second relay is a manual-ON only with a maximum 30 minute time-out for maximum energy savings to comply with CEC Title 24
  • The OSSMD is intended to control a light circuit and a fan. The button on the sensor provides ON control for both circuits and OFF for lighting circuits only. The sensor will automatically turn ON both when occupancy is detected. When no movement is detected, the primary relay will turn OFF after the delay OFF time expires. The fan will remain ON to clear the airspace for an additional 10 minutes after the time-out or button press
  • Fits in a standard single-gang wall box and replaces two single-pole wall-switches for fast and easy installation; neutral and ground connection required for OSSMD-MD and OSSMD-FT. OSSMD-GD does not require a neutral for installation. 180 field-of-view provides approximately 2400 square feet of coverage, suitable for a variety of commercial areas
  • Low-profile design eliminates obtrusive "scanning-device" look. Elegant Decora wallplates complement any interior for sleek aesthetics; uses Decora wallplates and coordinates with Leviton's popular line of Decora wiring devices. Convenient pushbuttons provide manual-ON/OFF light switching of each load at any time
  • Segmented Fresnel lens provides optimum sensitivity and performance. Designed with an extensive "minor motion" area where even slight body movements will be detected. Patented blinders - adjustable horizontal field-of-view (PIR) may be adjusted between 180 and 60 of arc by using integral blinders located on either side of the lens. No masking tape required
  • Manual-ON/auto-OFF mode for installations where manual-ON switching is required but auto-OFF switching is still desired for CEC Title 24 energy savings. To comply with CEC Title 24, LED indicator light flashes when sensor detects motion to verify detection is active. Green flashes for ultrasonic, red flashes for PIR. Ability to disable PIR or U/S for added flexibility
  • Time delay adjustment for delayed-OFF time settings of 30 seconds (for walking test), 10 minutes, 20 minutes, and 30 minutes. Allows customized adjustments to maximize energy savings. Light sensor measures the ambient light in the room when it first detects motion and leaves the lights OFF (hold-off) if there is enough light in the room or turns the lights connected to the first relay ON if there is not enough light in the room
  • Vandal resistant PIR lens and False detection circuitry. Self-Adaptive technology eliminates callbacks for adjustments. Time delay and sensitivity settings are continually adjusted to occupant patterns of use in auto adapt mode. Exclusive Walk-Through feature provides increased energy savings by not leaving the lights ON for an extended period after only momentary occupancy
  • Vacancy confirmation; when the time out expires and the relay turns OFF, a 30-second vacancy confirmation exists to turn the relays back ON. One unit can be used for 120V through 277V lighting. Compatible with both electronic and magnetic ballast . California residents Click here for Proposition 65 warning

Technical Details
Weight 1.00 lb.
Color Color : Light Almond
Sell Pack Qty 2 in a pack
UPC 078477403174
Manufacturer Part Number OSSMD-GDT-2pk
Product Restricted:

Questions? Call 1-888-252-4252
Similar Items
100% Secure Payments

All major credit & debit cards accepted

Money back guarantee

100% money back guarantee

Online Support

1-888-252-4252, MON-FRI, 8:30AM-5PM CST

<[if (IE 8)&!(IEMobile)]>